Improvement in the initial ISQ through use of a modified surgical technique
Through Use of a Modified Surgical Technique
The Titanium Base for CAD/CAM Solutions makes it possible to create individually manufactured abutments. The Titanium Base allows access into digitalized CAD/CAM fabrication.
The Titanium Base data files can be downloaded by your laboratory as CAD/CAM library from the Thommen website and are thus available to all users of an open-source CAD/CAM system. The 3D data for the Thommen Titanium Base for CAD/CAM are also already integrated into the libraries of various CAD/CAM manufacturers.
The VARIOflex abutment addresses the variety of clinical requirements with a single abutment type and offers greater flexibility in the choice and design of dental restorations.
The VARIOflex abutment can be used both for screw-retained and cemented single-tooth or bridge restorations. Thanks to the slim and solid design, this abutment is suitable for both posterior and esthetically challenging anterior areas.
The CAD/CAM-suitable abutments can be adjusted to the clinical situation and the material-specific requirements. The CAD library offers a selection of various cylinder heights with just one abutment in the digital production process. The abutments have been developed especially for restorations made of plastic, pressed ceramics, and zirconium oxide. They provide the best possible support for long and tall superstructures, as well as for deeply placed implants.
CAD library are available for the VARIOflex abutment. Detailed information can be found in the corresponding instructions for use.
The Titanium Base for CAD/CAM solutions makes it possible to create individually manufactured abutments. The Titanium Base allows access into digitalized CAD/CAM fabrication.
The milled abutment for CAD/CAM type II is machined in the Original Medentika® PreFace Abutment Holder in a suitable milling system. PreFace Abutment Holders can be ordered directly from the milling machine manufacturer. You can also obtain information on the use of the Medentika® PreFace Abutment Holder from your milling machine manufacturer.
Link to the CAD/CAM libraries