Are you looking for a document? Click here to go to the Downloadcenter

VARIOflex

The VARIOflex abutment meets a variety of clinical requirements and stands for flexibility in the selection and design of prosthetic restorations.

The VARIOflex abutment can be used for both screw-retained and cemented restorations. Thanks to its slim and solid design, this abutment is suitable for both the posterior and the esthetically demanding anterior region.

The CAD/CAM-compatible abutments can be adapted to the clinical situation and material-specific requirements. The CAD/CAM library offers the selection of different cylinder heights with only one abutment during the manufacturing process. The abutments have been specially developed for restorations with plastic, pressable ceramics and zirconium oxide and offer the best possible support - both for long or high superstructures and for deeper-set implants.

CAD/CAM libraries are available for the VARIOflex abutment. For detailed information, please refer to the corresponding instructions for use.

CAD/CAM Libraries

Electronic instructions for use – VARIOflex - THM611119 

 

Benefits at a Glance

  • Digitally applicable.
  • Flexible material selection: Plastic, press ceramic, metal and zirconium oxide.
  • Prosthetic variety with one design.
  • Enables high superstructure.

The Titanium Base for CAD/CAM Solutions makes it possible to create individually manufactured abutments. The Titanium Base allows for digital CAD/CAM fabrication.

The Titanium Base data files can be downloaded by your laboratory from the CAD/CAM library on the Thommen website and are thus available to all users of an open-source CAD/CAM system. The 3D data for the Thommen Titanium Base for CAD/CAM are also already integrated into the libraries of various CAD/CAM manufacturers.

CAD/CAM Libraries

Instructions for use - Titanium Base for CAD/CAM - THM61123

 

Titanium Base with hexagon for CAD/CAM

 

Titanium Base bridge for CAD/CAM

Benefits at a Glance

  • Efficient digital manufacturing.
  • Individual emergence profiles.
  • Tooth-coloured abutment-crown transitions.
  • Cemented or screw-retained crown and bridge restorations possible.

The Milling Abutment for CAD/CAM type II makes it possible to create individually manufactured abutments. 

The milled abutment for CAD/CAM type II is machined in the Original Medentika® PreFace Abutment Holder in a suitable milling system. PreFace Abutment Holders can be ordered directly from the milling machine manufacturer. You can also obtain information on the use of the Medentika® PreFace Abutment Holder from your milling machine manufacturer.

CAD/CAM Libraries

Instructions for Use - Milling Abutment for CAD/CAM type I & II - THM61137

Milling abutment for CAD/CAM type II

 

Compatible milling machines:

  • Datron D5®
  • Dental Concept DC1/DC5®
  • imes-icore®
  • MB Maschinen Cobra Mill®
  • Primacon PFM 24 mediMill®
  • R+K®
  • Röders RXD®
  • VHF®
  • Wissner Gamma 202®

Benefits at a Glance

  • In-house production - the added value remains with you
  • Individual abutments with original Thommen Medical implant connection.
  • Efficient production - serial processing of six blanks without reclamping.

VARIO abutments are used for the fabrication of occlusal screw-retained restorations. Restorative options include single crowns, custom abutments, and multi-unit bridge restorations.

They consist of a nonoxidizing cast-on alloy base and a plastic cylinder that forms the screw channel. The plastic cylinder will be incorporated into the pattern and leave no residues after burn-out. The minimal height of VARIO abutments provide restorative flexibility, especially in limited spaces. The plastic cylinder is easy to shorten to the desired height, which guarantees precise, simple, and rapid pattern fabrication.

For all those who would rather not work with high-gold content, castable materials, but are looking for cost-effective solutions on an adhesive basis, the VARIOeco is a good alternative.

Instructions for use - VARIO - THM61134

 

VARIO gold abutment for crowns

 

VARIO gold abutment for bridges

 

Benefits at a Glance

  • Prefabricated connection geometry and screw seat made of high-gold cast-on alloy.
  • Fabrication of individual abutments possible.
  • Direct connection to the implant, no intermediate parts necessary.
  • Can also be used in cases of limited occlusal space due to the minimum overall height.
  • Available with hexagon for crowns and with cone for bridges.

The 17° angled VARIO abutments are ideal for occlusally screw-retained single-tooth restorations with a pronounced angulation of the implant axis in relation to the planned prosthetics. Smaller bridge restorations are also possible if a suitable insertion direction is considered.

The abutments are available in two different taper orientations with respect to the hexagon to allow for optimal abutment alignment. The prefabricated cast-on gold alloy screw seat ensures a precise connection between the final prosthetics and the abutment.

Instructions for use - VARIO Abutment 17° - THM61136

VARIO Abutment 17° and occlusal screw seat

 

The 17° angled VARIO Abutment set contains:
  • 1x VARIO Abutment 17°
  • 1x VARIO screw seat
  • 1x Abutment screw
  • 1x Occlusal screw

Benefits at a Glance

  • Axial angulation of up to 17° can be managed.
  • Two abutment versions for an exact alignment.
  • Prefabricated gold alloy screw seat for optimal precision.
  • Can be combined with existing VARIO Abutments for bridge.

VARIOmulti


VARIOmulti Abutments offer the perfect solution for the fabrication of implant supported multi-unit, occlusal screw-retained bridge restorations.

Through the combination of straight and angled VARIOmulti Abutments, a restoration is possible in terms of an All-on 4® concept.
The prosthetics line offers a complete range of tertiary parts (impression coping, protective coping, temporary cap, etc.), which permit an efficient restoration at the abutment level.

Instructions for use - VARIOmulti - THM61118

 

VARIOmulti Abutment

 

 

VARIOmulti Abutment, angled 17°

 

 

VARIOmulti Abutment, angled 30°

 


ART abutments are available in two basic designs, which provide an optimal combination of ease-of-use and customizing options to suit the exact conditions of the patient:
• ART Abutment: compatible with prefabricated SPI®EASY Abutment components for impression taking and temporary restoration for efficient restoration with ART Abutments.
• ART Grinding Abutment: provides a greater volume of material for creating fully customized abutments.

Instructions for use - ART - THM61135

ART Grinding Abutment

 

ART Abutment

 

Benefits at a Glance

  • Highly precise and fully customizable.
  • Natural translucency with no metallic appearance.
  • Biocompatible and resistant to plaque.
  • Highest degree of precision and dependable mechanical strength.
  • Two designs for optimum flexibility.
  • Compatible with EASY system components.
Thommen Medical logo

This website uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.